| Step | | Procedure & Parts & Tools |
| 1 |
|
TURN THE MACHINE OFF AT THE KEY AND DISCONNECT THE CHARGER PLUG TO DISCONNECT THE BATTERIES. PULL TO REMOVE THE BLUE CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 2 |
|
PULL TO REMOVE THE RED CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 3 |
|
REMOVE THE 2 TANK BOLTS ON EACH SIDE OF THE MACHINE. THESE BOLTS ARE LOCATED AT THE FRONT OF THE MACHINE AT THE BASE.
| Wrench-Allen metric 6.0mm |
|
|
| 4 |
|
REMOVE THE 2 SHROUD BOLTS ON EACH SIDE OF THE MACHINE
| Wrench-Allen metric 6.0mm |
|
|
| 5 |
|
REMOVE THE 3 BOLTS HOLDING THE BRUSH MOTOR
| Wrench-metric 10mm |
|
|
| 6 |
|
PULL UP ON THE BRUSH MOTOR TO REMOVE IT FROM THE MACHINE
|
| 7 |
|
REMOVE THE BRUSH MOTOR PLATE
|
| 8 |
|
REMOVE THE BELT
|
| 9 |
|
REVERSE STEPS 4 THRU 8 TO INSTALL A NEW BELT.
|